Minimise Your Brush Strokes with Fusion Extender

HOW TO GET A SMOOTH PAINT FINISH WITHOUT BRUSHSTROKES-

FUSION EXTENDER TUTORIAL

Have you been struggling to get a super smooth paint finish? Struggle no more! We are thrilled to introduce the new Fusion product, Extender! It works by not allowing the paint to dry quickly, therefore giving you what’s known in the paint industry as “more open time”, which is more working time with the paint before it dries. Therefore Extender can help eliminate the appearance of brush strokes! It’s really easy to use, we will show you below how to use it and achieve a perfectly smooth finish!

Sometimes the culprit to brushstrokes are the tools used, or too much paint on the tools, or sometimes it can simply be the environment, that’s where the Extender comes in handy! Check out this post on the Top 5 Paint Tools Every DIY’er needs! Ensure that you’re using a high quality fine brush like our Staalmeester Brushes, they have the perfect synthetic bristles to avoid leaving brush strokes behind. Generally using too much paint will create excess ridges and lines from simply too much product on the surface. However, sometimes the environment is too hot and or dry, and the paint simply dries too quickly creating more brushstrokes. Adding some Extender to your paint will help to eliminate those brush strokes. It’s as simple as adding a few drops to your paint! Just follow this simple tutorial to ensure a brush stroke free look on your next Fusion project.

Supplies:
-Extender
-Pint of Lamp White
-Sanding pad
-TSP
-Icypole Stick
-Paint-Lamp White

Steps:

Prep your piece. To begin with, clean your piece with TSP and give it a light scuff sand. Using these products and completing proper prep helps ensure a durable long lasting paint job.

To begin with mix a quarter of a bottle (15ml) up to a half a bottle of Extender (30ml) together with a 500ml pot. Using 1 bottle of Extender is good for to 2-4 pots. Less can be added if desired. However adding more is not recommended as it will impact your drying and curing time.

 

Paint your first coat. Thanks to the Extender there will be a longer drying time giving more time to work with the paint and smooth out any excess.

Once your first coat fully dries, apply a subsequent coats as needed. We recommend waiting at least 4 hours between coats when using the Extender. Should you notice that applying your second coat is lifting off the first, either too much extender was used, or it needs more time to dry and cure before applying another coat. Patience is key when using Extender. As we are covering a dark piece the 2nd coat was required for full even coverage.

And now your beautiful piece is ready for it’s home!